On a Windows Server 2003-based computer or on a Windows Server 2008-based computer, you install Microsoft Message Queuing with the Active Directory Integrated option enabled. When you do this, the Message Queuing service may not start for the first time.

Back to the top

This issue may occur because of the delay for the Active Directory replication. The delay occurs if the following conditions are true:

•	An object was created on a remote domain controller.
•	The computer on which Message Queuing is installed selects a different domain controller when the computer starts.

Back to the top

To resolve this issue, use one of the following methods.

Back to the top

Method 1

Wait for the Active Directory replication.

Back to the top

Method 2

Manually perform an Active Directory replication before you start the Message Queuing service.

Back to the top

You can use the Replmon.exe tool to manually perform an Active Directory replication. For more information about the Replmon.exe tool, visit the following Microsoft Web site:

Back to the top

When you try to create a Read-Only Domain Controller (RODC) Install from Media (IFM) or a RODC Sysvol IFM by using the Ntdsutil.exe tool on a Windows Server 2008-based computer, you may receive the following error message:

Additionally, the following events are logged in the Application log:

Source: ESENT
Date: DateTime
Event ID: 454
Level: Error
Computer: Domain Controller Name
Description:NTDS (4676) Database recovery/restore failed with unexpected error -1216.

Source: ESENT
Date: DateTime
Event ID: 494
Level: Error
User: Username
Computer: Domain Controller Name
Description:NTDS (4676) Database recovery failed with error -1216 because it encountered references to a database, ‘D : < Folder Location> Active Directory ntds.dit’, which is no longer present. The database was not brought to a Clean Shutdown state before it was removed (or possibly moved or renamed). The database engine will not permit recovery to complete for this instance until the missing database is re-instated. If the database is truly no longer available and no longer required, procedures for recovering from this error are available in the Microsoft Knowledge Base or by following the more information link at the bottom of this message

This issue occurs if the previous IFM procedure was canceled or closed before it was finished. When this occurs, temporary files may be left in the Temp folder in the user’s profile.

To resolve this issue, use one of the following methods.

Method 1

Restart the domain controller.

Method 2

Delete all the temporary files from the 1 folder.

Note The 1 folder is located inside the Temp folder.

To do this, follow these steps:

1. Open the Temp folder in Windows Explorer.Typically, the Temp folder is in the following location:
   C: Users Logged on User Name Appdata Local Temp
2. In the Temp folder, open the 1 folder.
3. Delete all the files that are in the 1 folder.

This article describes how to configure Distributed File System Replication (DFSR) file-type compression in Windows Server 2008.

In Windows Server 2008, you can use DFSR to configure the compression of files by file type. This differs from the version of DFSR in Windows Server 2003 R2. In Windows Server 2003 R2, DFSR has the following hard-coded extension list:

•	.wma
•	.wmv
•	.zip
•	.jpg
•	.mpg
•	.mpeg
•	.m1v
•	.mp2
•	.mp3
•	.mpa
•	.cab
•	.wav
•	.snd
•	.au
•	.asf
•	.wm
•	.avi
•	.z
•	.gz
•	.tgz
•	.frx

Notes

•	File compression in DFSR uses the XPRESS compression format in the DFSR staging area. XPRESS compression differs from Remote Differential Compression (RDC). RDC uses over-the-wire delta replication of file blocks.
•	Generally, it is not useful to perform additional compression on files that are already compressed.

You can prevent the compression of specific file types by using the msDFSR-DefaultCompressionExclusionFilter attribute. To do this, follow these steps:

1.	Click Start, type adsiedit.msc in the Start Search box, right-click cmd in the Programs list, and then click Run as administrator. If you are prompted for an administrator password or for confirmation, type the password, or click Continue.
2.	In the ADSI Edit snap-in, expand the domain node.
3.	Locate a DFSR content set. For example, locate the following: CN=SYSVOL Share,CN=Content,CN=Domain System Volume,CN=DFSR-GlobalSettings,CN=System,CN=Domain name,CN=com
4.	Right-click CN=SYSVOL Share, and then click Properties.
5.	Click the msDFSR-DefaultCompressionExclusionFilter attribute, and then click Edit.
6.	In the Value box, type a comma-separated list of file name extensions that you do not want to be compressed when DFSR stages a file. For example, type the following: wma,wmv,zip,jpg,mpg,mpeg,m1v,mp2,mp3,mpa,cab,wav,snd,au,asf,wm, avi,z,gz,tgz,frx,dcm Note This list contains the hard-coded list of extensions and the .dcm file type. A .dcm file is a compressed medical image file.
7.	Click OK two times.
8.	Close the ADSI Edit snap-in.

All files that have an extension that is listed in the msDFSR-DefaultCompressionExclusionFilter attribute will no longer be compressed in the staging directory.

If the msDFSR-DefaultCompressionExclusionFilter attribute is configured as <Not Set>, the default hard-coded extension list will be used from Windows Server 2003 R2. If you make any changes to the attribute, the default exclusion list is completely ignored.

Note Always include the default exclusion list when you customize the settings.

Back to the top

List of issues that are fixed

This hotfix fixes the following issues:

•	932842 (/Feedback.aspx?kbNumber=932842/) A nested conditional field that contains a DocProperty field or a DocVariable field may not be updated as expected in a header or in a footer in Word 2003
•	943733 (/Feedback.aspx?kbNumber=943733/) After you merge or split table cells in a Word 2007 document while Track Changes is enabled, the row that contains the cells is not marked as a revision

This hotfix fixes the following issues that are not previously documented in a Microsoft Knowledge Base article:

•	You select Insert as Hyperlink to insert a file from a mapped network drive in an e-mail message. However, the path is not correctly resolved after the e-mail message is sent in Office Outlook 2007. Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base: 322756 (/Feedback.aspx?kbNumber=322756/) How to back up and restore the registry in Windows To fix this problem, you have to set the following registry entry after you install this hotfix package: HKEY_CURRENT_USER Software Microsoft Office 12.0 Word Options UseUNCPathInFileAttachAsHlink The type for the UseUNCPathInFileAttachAsHlink registry subkey is DWORD, and the value must be set to 1. Note If this registry entry does not already exist, you must create it.
•	Messages that have ink shapes do not include the ink when these messages are printed in Outlook 2007.
•	Autorecovery save is enabled with a 10-minute interval when you change another Word option by using the object model in Word 2007.
•	Word style numbering is not applied when you copy and paste text into new styles in Word 2007.
•	The Always check spelling before sending function does not work in plain text e-mail messages in Outlook 2007.
•	If a header in a multisection Word 2007 document is unlinked from the previous header and if this header contains a content control, the content control will be converted to text after the document is saved, closed, and reopened.

Back to the top

Hotfix information

A supported hotfix is now available from Microsoft. However, this hotfix is intended to correct only the problem that is described in this article. Apply this hotfix only to systems that are experiencing this specific problem. This hotfix might receive additional testing. Therefore, if you are not severely affected by this problem, we recommend that you wait for the next 2007 Microsoft Office suites service pack that contains this hotfix.

To resolve this problem, submit a request to Microsoft Online Customer Services to obtain the hotfix. To submit an online request to obtain the hotfix, visit the following Microsoft Web site:

Note If additional issues occur or any troubleshooting is required, you might have to create a separate service request. The usual support costs will apply to additional support questions and issues that do not qualify for this specific hotfix. To create a separate service request, visit the following Microsoft Web site:

Prerequisites

There are no prerequisites for installing this hotfix package.

Restart information

You do not have to restart the computer after you apply this hotfix package.

Hotfix replacement information

This hotfix is not replaced by any later hotfix.

Registry information

To use one of the hotfixes in this package, you must either create a registry key or modify a registry key.

File information

This hotfix may not contain all the files that you must have to fully update a product to the latest build. This hotfix contains only the files that you must have to correct the issues that are listed in this article.

The global version of this hotfix has the file attributes (or later file attributes) that are listed in the following table. The dates and times for these files are listed in Coordinated Universal Time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time item in Control Panel.

Download information

File name	File version	File size	Date	Time	Platform
Office-kb941273-fullfile-x86-glb.exe	12.0.6300.5000	11,795,000	28-Jan-2008	17:55	x86

Microsoft Windows Installer .msp file information

File name	File version	File size	Date	Time	Platform
Word.msp	Not Applicable	13,064,704	28-Jan-2008	18:13	Not Applicable

Contents of the Excel.msp file

File name	File version	File size	Date	Time	Platform
Winword.exe	12.0.6300.5000	349,720	12-Dec-2007	23:54	x86
Wwlib.dll	12.0.6300.5000	17,485,848	12-Dec-2007	23:54	x86

For more information about software update terminology, click the following article number to view the article in the Microsoft Knowledge Base:

Back to the top

Back to the top

Issues that the hotfix package fixes

This hotfix fixes the following issues that were not previously documented in a Microsoft Knowledge Base article:

•	You enable the Confirm file format conversion on open option in Word 2007. When you double-click a newly created .docx file on the desktop, the Convert File dialog box appears. Note This problem occurs because the .docx file is a zero-byte file. The file is not a valid Word .docx file.
•	When you save a .docx file as an .rtf file, some characters in Office Math Markup Language (OMML) equations are changed.

Back to the top

Hotfix information

A supported hotfix is now available from Microsoft. However, this hotfix is intended to correct only the problem that is described in this article. Apply this hotfix only to systems that are experiencing this specific problem. This hotfix might receive additional testing. Therefore, if you are not severely affected by this problem, we recommend that you wait for the next 2007 Microsoft Office suites service pack that contains this hotfix.

To resolve this problem, submit a request to Microsoft Online Customer Services to obtain the hotfix. To submit an online request to obtain the hotfix, visit the following Microsoft Web site:

Note If additional issues occur or any troubleshooting is required, you might have to create a separate service request. The usual support costs will apply to additional support questions and issues that do not qualify for this specific hotfix. To create a separate service request, visit the following Microsoft Web site:

Prerequisites

There are no prerequisites for installing this hotfix.

Restart information

You do not have to restart the computer after you apply this hotfix.

Hotfix replacement information

This hotfix does not replace a previously released hotfix.

Registry information

To use one of the hotfixes in this package, you do not have to make any changes to the registry.

File information

This hotfix may not contain all the files that you must have to fully update a product to the latest build. This hotfix contains only the files that you must have to correct the issues that are listed in this article.

The global version of this hotfix has the file attributes (or later file attributes) that are listed in the following table. The dates and times for these files are listed in Coordinated Universal Time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time item in Control Panel.

Download information

File name	File version	File size	Date	Time	Platform
Office-kb949950-fullfile-x86-glb.exe	12.0.6300.5000	15,850,056	11-Mar-2008	21:22	x86

Microsoft Windows Installer .msp file information

File name	File version	File size	Date	Time	Platform
Word.msp	Not Applicable	13,222,912	12-Mar-2008	03:32	Not Applicable
Wordconv.msp	Not Applicable	6,249,984	12-Mar-2008	03:32	Not Applicable

Contents of the Word.msp file

File name	File version	File size	Date	Time	Platform
Msword.olb	12.0.6300.5000	768,024	07-Dec-2007	01:05	x86
Winword.exe	12.0.6300.5000	349,720	12-Dec-2007	23:54	x86
Wwlib.dll	12.0.6306.5000	17,490,456	06-Mar-2008	06:39	x86

Contents of the Wordconv.msp file

File name	File version	File size	Date	Time	Platform
Wordcnv.dll	12.0.6306.5000	4,280,344	06-Mar-2008	06:36	x86
Wrd12exe.exe	12.0.6300.5000	24,584	13-Dec-2007	01:08	x86

For more information about software update terminology, click the following article number to view the article in the Microsoft Knowledge Base:

Back to the top

Consider the following scenario:

•	You have a computer that is running a Japanese version of Windows Server 2008 or of Windows Vista. Or, you have the Japanese language pack installed on a computer that is running an English version of Windows Server 2008 or of Windows Vista.
•	On this computer, you use the Group Policy Management Editor to edit a Group Policy object.

In this scenario, the following Group Policy setting is localized incorrectly:

Specifically, Documents is localized as 最近使ったファイル. This localized phrase means Recently used files.

Back to the top

Windows Server 2008 hotfix information

A supported hotfix is available from Microsoft. However, this hotfix is intended to correct only the problem that is described in this article. Apply this hotfix only to systems that are experiencing this specific problem. This hotfix might receive additional testing. Therefore, if you are not severely affected by this problem, we recommend that you wait for the next software update that contains this hotfix.

If the hotfix is available for download, there is a Hotfix download available section at the top of this Knowledge Base article. If this section does not appear, contact Microsoft Customer Service and Support to obtain the hotfix.

Note If additional issues occur or if any troubleshooting is required, you might have to create a separate service request. The usual support costs will apply to additional support questions and issues that do not qualify for this specific hotfix. For a complete list of Microsoft Customer Service and Support telephone numbers or to create a separate service request, visit the following Microsoft Web site:

Note The Hotfix download available form displays the languages for which the hotfix is available. If you do not see your language, it is because a hotfix is not available for that language.

Prerequisites

No prerequisites are required.

Restart requirement

You do not have to restart the computer after you apply this hotfix.

Hotfix replacement information

This hotfix does not replace any other hotfixes.

File information

The English version of this hotfix has the file attributes (or later file attributes) that are listed in the following table. The dates and times for these files are listed in Coordinated Universal Time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time item in Control Panel.

Windows Server 2008, x86-based version

File name	File version	File size	Date	Time	Platform
Fde.dll.mui	6.0.6001.22205	16,896	18-Jun-2008	04:18	Not Applicable

Windows Server 2008, Itanium-based version

File name	File version	File size	Date	Time	Platform
Fde.dll.mui	6.0.6001.22205	16,384	18-Jun-2008	04:32	Not Applicable

Windows Server 2008, x64-based version

File name	File version	File size	Date	Time	Platform
Fde.dll.mui	6.0.6001.22205	16,384	18-Jun-2008	04:48	Not Applicable

Back to the top

Windows Vista hotfix information

A supported hotfix is available from Microsoft. However, this hotfix is intended to correct only the problem that is described in this article. Apply this hotfix only to systems that are experiencing this specific problem. This hotfix might receive additional testing. Therefore, if you are not severely affected by this problem, we recommend that you wait for the next software update that contains this hotfix.

If the hotfix is available for download, there is a Hotfix download available section at the top of this Knowledge Base article. If this section does not appear, contact Microsoft Customer Service and Support to obtain the hotfix.

Note If additional issues occur or if any troubleshooting is required, you might have to create a separate service request. The usual support costs will apply to additional support questions and issues that do not qualify for this specific hotfix. For a complete list of Microsoft Customer Service and Support telephone numbers or to create a separate service request, visit the following Microsoft Web site:

Note The Hotfix download available form displays the languages for which the hotfix is available. If you do not see your language, it is because a hotfix is not available for that language.

Prerequisites

To apply this hotfix, you must have Windows Vista Service Pack 1 installed.

Restart requirement

You do not have to restart the computer after you apply this hotfix.

Hotfix replacement information

This hotfix does not replace any other hotfixes.

File information

The English version of this hotfix has the file attributes (or later file attributes) that are listed in the following table. The dates and times for these files are listed in Coordinated Universal Time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time item in Control Panel.

Windows Vista with Service Pack 1, x86-based version

File name	File version	File size	Date	Time	Platform
Fde.dll.mui	6.0.6001.22205	16,896	18-Jun-2008	04:18	Not Applicable

Windows Vista with Service Pack 1, x64-based version

File name	File version	File size	Date	Time	Platform
Fde.dll.mui	6.0.6001.22205	16,384	18-Jun-2008	04:48	Not Applicable

Back to the top

Microsoft has confirmed that this is a problem in the Microsoft products that are listed in the Applies to section.

Back to the top

For more information about software update terminology, click the following article number to view the article in the Microsoft Knowledge Base:

Back to the top

On a Windows Vista-based or a Windows Server 2008-based computer, you disable the Fast User Switching feature. Later, if the password expires when the computer is locked, you cannot change the password. When you try to unlock the computer, you receive the following error message:

However, when the Fast User Switching feature is disabled, the Switch User option does not appear on the logon screen. Then, you have to restart the computer to change the password.

A hotfix is available to resolve this problem. After you apply the hotfix, you can see the Switch User option, and you can switch users in this specific scenario even if the Fast User Switching feature is disabled. This hotfix does not enable Fast User Switching in any other scenarios.

Hotfix information

A supported hotfix is available from Microsoft. However, this hotfix is intended to correct only the problem that is described in this article. Apply this hotfix only to systems that are experiencing this specific problem. This hotfix might receive additional testing. Therefore, if you are not severely affected by this problem, we recommend that you wait for the next software update that contains this hotfix.

If the hotfix is available for download, there is a Hotfix download available section at the top of this Knowledge Base article. If this section does not appear, contact Microsoft Customer Service and Support to obtain the hotfix.

Note If additional issues occur or if any troubleshooting is required, you might have to create a separate service request. The usual support costs will apply to additional support questions and issues that do not qualify for this specific hotfix. For a complete list of Microsoft Customer Service and Support telephone numbers or to create a separate service request, visit the following Microsoft Web site:

Note The Hotfix download available form displays the languages for which the hotfix is available. If you do not see your language, it is because a hotfix is not available for that language.

Prerequisites

To apply this hotfix, you must have Windows Vista Service Pack 1 or Windows Server 2008 installed on the computer.

Restart requirement

You have to restart the computer after you apply this hotfix.

Hotfix replacement information

This hotfix does not replace any other previously released hotfixes.

Registry information

To use this hotfix, you do not have to make any changes to the registry.

File information

The English version of this hotfix has the file attributes (or later file attributes) that are listed in the following table. The dates and times for these files are listed in Coordinated Universal Time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time item in Control Panel.

Windows Vista and Windows Server 2008 file information note

The MANIFEST files (.manifest) and MUM files (.mum) installed for each environment are listed separately. MUM and MANIFEST files, and the associated security catalog (.cat) files, are critical to maintaining the state of the updated component. The security catalog files (attributes not listed) are signed with a Microsoft digital signature.

For all supported x86-based versions of Windows Vista and Windows Server 2008

For all supported x64-based versions of Windows Vista and Windows Server 2008

For all supported Itanium-based versions of Windows Server 2008

Microsoft has confirmed that this is a problem in the Microsoft products that are listed in the Applies to section.

For more information about Fast User Switching, visit the following Microsoft Web site:

For more information, click the following article number to view the article in the Microsoft Knowledge Base:

Additional file information for Windows Vista and Windows Server 2008

Additional files for all supported x86-based versions of Windows Vista and Windows Server 2008

Additional files for all supported x64-based versions of Windows Vista and Windows Server 2008

Additional files for all supported x64-based versions of Windows Server 2008

When you use an application to print a graphics document on a computer that is running Windows Vista or Windows Server 2008, horizontal white bars or black boxes may unexpectedly appear in the output. This problem may occur when the DrvPlgBlt function is called to downscale an image.

This problem occurs only with certain combinations of applications and printer drivers. For example, this problem may occur when you print a graphics document in Adobe Photoshop in booklet mode by using a monochrome printer driver that supports Hewlett-Packard Graphics Language 2 (HPGL2).

Note This issue is not caused by the applications or printer drivers.

Hotfix information

Important Windows Vista and Windows Server 2008 hotfixes are included in the same packages. However, only one of these products may be listed on the “Hotfix Request” page. To request the hotfix package that applies to both Windows Vista and Windows Server 2008, just select the product that is listed on the page.

A supported hotfix is available from Microsoft. However, this hotfix is intended to correct only the problem that is described in this article. Apply this hotfix only to systems that are experiencing the problem described in this article. This hotfix might receive additional testing. Therefore, if you are not severely affected by this problem, we recommend that you wait for the next software update that contains this hotfix.

If the hotfix is available for download, there is a Hotfix download available section at the top of this Knowledge Base article. If this section does not appear, contact Microsoft Customer Service and Support to obtain the hotfix.

Note If additional issues occur or if any troubleshooting is required, you might have to create a separate service request. The usual support costs will apply to additional support questions and issues that do not qualify for this specific hotfix. For a complete list of Microsoft Customer Service and Support telephone numbers or to create a separate service request, visit the following Microsoft Web site:

Note The Hotfix download available form displays the languages for which the hotfix is available. If you do not see your language, it is because a hotfix is not available for that language.

Prerequisites

To apply this hotfix on a Windows Vista-based computer, you must have Windows Vista Service Pack 1 (SP1) installed.

For more information, click the following article number to view the article in the Microsoft Knowledge Base:

No prerequisites are required for Windows Server 2008-based computers.

Restart requirement

You must restart the computer after you apply this hotfix.

Hotfix replacement information

This hotfix does not replace any other hotfixes.

File information

The English version of this hotfix has the file attributes (or later file attributes) that are listed in the following table. The dates and times for these files are listed in Coordinated Universal Time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time item in Control Panel.

Windows Vista and Windows Server 2008 file information notes

• The files that apply to a specific product, milestone (RTM, SPn), and service branch (LDR, GDR) can be identified by examining the file version numbers as shown in the following table.
  Collapse this tableExpand this table

  Version	Product	Milestone	Service branch
  6.0.6000.16xxx	Windows Vista	RTM	GDR
  6.0.6000.20xxx	Windows Vista	RTM	LDR
  6.0.6001.18xxx	Windows Vista SP1 and Windows Server 2008 SP1	SP1	GDR
  6.0.6001.22xxx	Windows Vista SP1 and Windows Server 2008 SP1	SP1	LDR

• Service Pack 1 is integrated into Windows Server 2008.
• The MANIFEST files (.manifest) and MUM files (.mum) that are installed for each environment are listed separately. MUM and MANIFEST files, and the associated security catalog (.cat) files, are critical to maintaining the state of the updated component. The security catalog files (attributes not listed) are signed with a Microsoft digital signature.

For all supported x86-based versions of Windows Server 2008 and of Windows Vista

For all supported x64-based versions of Windows Server 2008 and of Windows Vista

For all supported Itanium-based versions of Windows Server 2008

Microsoft has confirmed that this is a problem in the Microsoft products that are listed in the Applies to section.

For more information about software update terminology, click the following article number to view the article in the Microsoft Knowledge Base:

The third-party products that this article discusses are manufactured by companies that are independent of Microsoft. Microsoft makes no warranty, implied or otherwise, about the performance or reliability of these products.

Additional file information for Windows Vista and for Windows Server 2008

Additional files for all supported x86-based versions of Windows Server 2008 and of Windows Vista

Additional files for all supported x64-based versions of Windows Server 2008 and of Windows Vista

Additional files for all supported Itanium-based versions of Windows Server 2008

Back to the top

List of issues that are fixed

This hotfix fixes the following issue that was not previously documented in a Microsoft Knowledge Base article:

•

In the German version of SharePoint Server 2007, you try to add a picture to a SharePoint page in the Foto section. In this section, the title of the button to select the picture that you want to use is Grafik schließen. In German, this means, Close picture. However, this could also be interpreted to mean, Remove picture.

Back to the top

Hotfix information

A supported hotfix is now available from Microsoft. However, this hotfix is intended to correct only the problem that is described in this article. Apply this hotfix only to systems that are experiencing this specific problem. This hotfix might receive additional testing. Therefore, if you are not severely affected by this problem, we recommend that you wait for the next 2007 Microsoft Office servers service pack that contains this hotfix.

To resolve this problem, submit a request to Microsoft Online Customer Services to obtain the hotfix. To submit an online request to obtain the hotfix, visit the following Microsoft Web site:

Note If additional issues occur or any troubleshooting is required, you might have to create a separate service request. The usual support costs will apply to additional support questions and issues that do not qualify for this specific hotfix. To create a separate service request, visit the following Microsoft Web site:

Prerequisites

There are no prerequisites for installing this hotfix.

Restart information

You do not have to restart the computer after you apply this hotfix.

Hotfix replacement information

This hotfix is not replaced by any later hotfix.

Registry information

To use one of the hotfixes in this package, you do not have to make any changes to the registry.

File information

This hotfix may not contain all the files that you must have to fully update a product to the latest build. This hotfix contains only the files that you must have to correct the issues that are listed in this article.

32-bit version

The German version of this hotfix uses a Microsoft Windows Installer package to install the hotfix. The dates and the times for these files are listed in Coordinated Universal Time (UTC) in the following table. When you view the file information, the date is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time item in Control Panel.

Download information

File name	File version	File size	Date	Time	Platform
Office-kb944710-fullfile-x86-de-de.exe	12.0.6300.5000	2,971,336	01-Feb-2008	04:19	x86

Microsoft Windows Installer .msp file information

File name	File version	File size	Date	Time	Platform
OSRCHMUI-de-de.msp	Not Applicable	1,825,280	31-Jan-2008	18:38	Not Applicable
Spsmui-de-de.msp	Not Applicable	1,638,400	31-Jan-2008	18:38	Not Applicable

After the hotfix is installed, the German version of this hotfix has the file attributes, or a later version of the file attributes, that are listed in the following table:

OSRCHMUI-de-de.msp

File name	File version	File size	Date	Time	Platform
Cssportalstyle.css	Not Applicable	27,003	07-Dec-2007	09:49	Not Applicable
Mssmsg.dll	12.0.6300.5000	276,000	14-Dec-2007	14:20	Not Applicable
Notesstp.exe.oss	12.0.6300.5000	234,528	14-Dec-2007	14:20	Not Applicable
Oss.search.data.sql	Not Applicable	362,539	14-Dec-2007	13:04	Not Applicable
Oss.search.intlr.dll	12.0.6300.5000	177,184	14-Dec-2007	14:20	Not Applicable
Oss.search.sql	Not Applicable	343,527	14-Dec-2007	13:04	Not Applicable
Spsintlr.dll	12.0.6300.5000	1,156,176	07-Dec-2007	12:42	Not Applicable

Spsmui-de-de.msp

File name	File version	File size	Date	Time	Platform
Cssportalstyle.css	Not Applicable	27,003	07-Dec-2007	09:49	Not Applicable
Editmenu.js	Not Applicable	11,844	24-Jan-2008	07:56	Not Applicable
Htmledtr.js	Not Applicable	290,203	24-Jan-2008	07:56	Not Applicable
Ptdlg.js	Not Applicable	2,319	24-Jan-2008	07:56	Not Applicable
Sm.js	Not Applicable	52,671	24-Jan-2008	07:55	Not Applicable
Spsintlr.dll	12.0.6300.5000	1,156,176	07-Dec-2007	12:42	Not Applicable

64-bit version

The German version of this hotfix uses a Microsoft Windows Installer package to install the hotfix. The dates and the times for these files are listed in Coordinated Universal Time (UTC) in the following table. When you view the file information, the date is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time item in Control Panel.

Download information

File name	File version	File size	Date	Time	Platform
Office-kb944710-fullfile-x64-de-de.exe	12.0.6300.5000	2,908,368	01-Feb-2008	04:19	x86

Microsoft Windows Installer .msp file information

File name	File version	File size	Date	Time	Platform
OSRCHMUI-de-de.msp	Not Applicable	1,761,792	31-Jan-2008	18:50	Not Applicable
Spsmui-de-de.msp	Not Applicable	1,638,400	31-Jan-2008	18:50	Not Applicable

After the hotfix is installed, the German version of this hotfix has the file attributes, or a later version of the file attributes, that are listed in the following table:

OSRCHMUI-de-de.msp

File name	File version	File size	Date	Time	Platform
Cssportalstyle.css	Not Applicable	27,003	07-Dec-2007	09:49	Not Applicable
Mssmsg.dll	12.0.6300.5000	279,584	14-Dec-2007	14:55	Not Applicable
Oss.search.data.sql	Not Applicable	362,539	14-Dec-2007	13:04	Not Applicable
Oss.search.intlr.dll	12.0.6300.5000	177,184	14-Dec-2007	14:55	Not Applicable
Oss.search.sql	Not Applicable	343,527	14-Dec-2007	13:04	Not Applicable
Spsintlr.dll	12.0.6300.5000	1,156,176	07-Dec-2007	13:18	Not Applicable

Spsmui-de-de.msp

File name	File version	File size	Date	Time	Platform
Cssportalstyle.css	Not Applicable	27,003	07-Dec-2007	09:49	Not Applicable
Editmenu.js	Not Applicable	11,844	24-Jan-2008	07:56	Not Applicable
Htmledtr.js	Not Applicable	290,203	24-Jan-2008	07:56	Not Applicable
Ptdlg.js	Not Applicable	2,319	24-Jan-2008	07:56	Not Applicable
Sm.js	Not Applicable	52,671	24-Jan-2008	07:55	Not Applicable
Spsintlr.dll	12.0.6300.5000	1,156,176	07-Dec-2007	13:18	Not Applicable

Back to the top

Source: Microsoft Support

Back to the top

RAPID PUBLISHING ARTICLES PROVIDE INFORMATION DIRECTLY FROM WITHIN THE MICROSOFT SUPPORT ORGANIZATION. THE INFORMATION CONTAINED HEREIN IS CREATED IN RESPONSE TO EMERGING OR UNIQUE TOPICS, OR IS INTENDED SUPPLEMENT OTHER KNOWLEDGE BASE INFORMATION.

Back to the top

Installing the Visual C++ 2008 Redistributable Package (VCRedist_x86.exe, VCRedist_x64.exe, VCRedist_ia64.exe) for Visual Studio 2008 RTM.

Back to the top

Following files are generated on the system root directory :

install.exe
install.res.1028.dll
install.res.1031.dll
install.res.1033.dll
install.res.1036.dll
install.res.1040.dll
install.res.1041.dll
install.res.1042.dll
install.res.2052.dll
install.res.3082.dll
vcredist.bmp
globdata.ini
install.ini
eula.1028.txt
eula.1031.txt
eula.1033.txt
eula.1036.txt
eula.1040.txt
eula.1041.txt
eula.1042.txt
eula.2052.txt
eula.3082.txt
vc_redist.msi
vc_redist.cab

Back to the top

These temporary files are erroneously generated by the installer into the system root directory instead of the temp directory.

Back to the top

These files are unnecessary and can be safely deleted from the system. The functioning of the runtime library will not be affected by this.
Its a known bug and is planned to be fixed in VS2008 SP1.

Back to the top

Redistributing Visual C++ Files (http://msdn2.microsoft.com/en-us/library/ms235299.aspx)
Please visit the Visual Studio home page on MSDN (http://msdn2.microsoft.com/en-us/vstudio/default.aspx) for the latest updates

Back to the top

MICROSOFT AND/OR ITS SUPPLIERS MAKE NO REPRESENTATIONS OR WARRANTIES ABOUT THE SUITABILITY, RELIABILITY OR ACCURACY OF THE INFORMATION CONTAINED IN THE DOCUMENTS AND RELATED GRAPHICS PUBLISHED ON THIS WEBSITE (THE “MATERIALS”) FOR ANY PURPOSE. THE MATERIALS MAY INCLUDE TECHNICAL INACCURACIES OR TYPOGRAPHICAL ERRORS AND MAY BE REVISED AT ANY TIME WITHOUT NOTICE.

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, MICROSOFT AND/OR ITS SUPPLIERS DISCLAIM AND EXCLUDE ALL REPRESENTATIONS, WARRANTIES, AND CONDITIONS WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT LIMITED TO REPRESENTATIONS, WARRANTIES, OR CONDITIONS OF TITLE, NON INFRINGEMENT, SATISFACTORY CONDITION OR QUALITY, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, WITH RESPECT TO THE MATERIALS.

Back to the top

Important This update supersedes and replaces update 951072, which was released in August 2008. This update also includes additional time zone changes that were signed in to law after update 951072 was created.

If you have already deployed update 951072, read the descriptions of the specific time zone changes that are addressed in this article to determine whether you must deploy this update immediately. If systems are not directly affected, you can schedule deployment at the next available opportunity.

We recommend that you deploy the most current Windows cumulative time zone update to guarantee the consistency of the time zone database on all systems.

Important Before you apply the update that is described in this article, be aware of potential issues that may affect Microsoft Outlook.

For more information about these issues, click the following article number to view the article in the Microsoft Knowledge Base:

Important

• If you are running Microsoft Exchange Server in an Information Technology (IT) environment, you must take additional measures to guarantee the correct operation of Exchange Server. For more information about the Exchange daylight saving time (DST) update, click the following article number to view the article in the Microsoft Knowledge Base:
  941018  (/Feedback.aspx?kbNumber=941018/ ) How to address daylight saving time by using the Exchange Calendar Update Tool
• Cumulative time zone updates contain only data that has changed for a specific region or that was added to maintain parity with other operating system versions. Therefore, if a time zone key has been deleted, some original values may not be restored after you apply the cumulative zone update.

  We do not recommend that you delete any registry keys that are related to time zones. On a computer that has incomplete time zone keys, first restore the time zone keys from a known good backup. Then, apply the update.

The update that this article describes changes the time zone data to accommodate daylight saving time (DST) changes in several countries, as outlined in this article. This update also includes other DST-related changes, time zone-related changes, and settings-related changes. Some of these changes have occurred since the products that are listed in the Applies to section were originally released.

The update that this article describes is a cumulative update rollup that includes all the changes that were previously released in Microsoft Knowledge Base (KB) articles 928388, 929120, 933360, 942763 and 951072.

For more information about how DST changes may affect other Microsoft products, visit the following Microsoft Web site:

For more information about how daylight saving time changes may affect other Microsoft products, click the following article number to view the article in the Microsoft Knowledge Base:

Note When you apply this update, you may receive the following message:

This message indicates that you have already applied the correct update or that Windows Updates or Microsoft Update has automatically installed this update. No additional action is required to update the Windows operating system software.
Note The contents of this update are not included in Windows XP Service Pack 3 (SP3). However, you can apply the update that this article describes to Windows XP Service Pack 3 (SP3).
Note This update is not included in Windows XP SP3. If you apply this update to Windows XP SP2 and then upgrade to Windows XP SP3, you do not have to reapply this update. If you do not apply this update to Windows XP SP2 and then upgrade to Windows SP3, you must apply this update to Windows XP SP3.

The following files are available for download from the Microsoft Download Center:

Download the Update for Windows Server 2003 (KB955839) package now. (http://www.microsoft.com/downloads/details.aspx?FamilyId=A8683CEC-6D69-4886-9FA7-E902797161E0)

Download the Update for Windows Server 2003 for Itanium-based Systems (KB955839) package now. (http://www.microsoft.com/downloads/details.aspx?FamilyId=EE86700E-D484-4E91-B4B4-346CC396E850)

Download the Update for Windows Server 2003 x64 Edition (KB955839) package now. (http://www.microsoft.com/downloads/details.aspx?FamilyId=F513778D-C698-4A1C-904B-3D50C0EDC3A3)

Download the Update for Windows Server 2008 (KB955839) package now. (http://www.microsoft.com/downloads/details.aspx?FamilyId=7F2A1B29-F749-4F4E-B0A5-8D8504461B07)

Download the Update for Windows Server 2008 for Itanium-based Systems (KB955839) package now. (http://www.microsoft.com/downloads/details.aspx?FamilyId=B61D7862-C3E5-43BF-B300-5C469873DDD9)

Download the Update for Windows Server 2008 x64 Edition (KB955839) package now. (http://www.microsoft.com/downloads/details.aspx?FamilyId=8A82BD98-3E55-4164-9C90-E42540710DEB)

Download the Update for Windows Vista (KB955839) package now. (http://www.microsoft.com/downloads/details.aspx?FamilyId=22F43320-8812-437D-BF66-B7F8DCBB51EF)

Download the Update for Windows Vista for x64-based Systems (KB955839) package now. (http://www.microsoft.com/downloads/details.aspx?FamilyId=3FE36628-3B0D-479E-A892-F2D9CB5D4ECD)

Download the Update for Windows XP (KB955839) package now. (http://www.microsoft.com/downloads/details.aspx?FamilyId=57A0E0A2-8E27-4DA1-B08D-DC008CC280BA)

Download the Update for Windows XP x64 Edition (KB955839) package now. (http://www.microsoft.com/downloads/details.aspx?FamilyId=D67870EE-420A-44C5-99A4-EF1852786F93)

Release Date: November 25, 2008

For more information about how to download Microsoft support files, click the following article number to view the article in the Microsoft Knowledge Base:

Microsoft scanned this file for viruses. Microsoft used the most current virus-detection software that was available on the date that the file was posted. The file is stored on security-enhanced servers that help prevent any unauthorized changes to the file.

Updates from the previous cumulative Windows time zone update

The following changes were made since the previous Windows cumulative time zone update. This update was described in Microsoft Knowledge Base article 951072:

• Argentina Standard Time:

  Adjusts DST start dates and end dates for the Buenos Aires time zone for changes after the prior cumulative time zone update was created (August 2008).

• Egypt Standard Time:

  Adjusts the DST end dates for the Cairo time zone for changes after the prior cumulative time zone update was created (August 2008).

• Iran Standard Time:

  Introduces DST start dates and end dates for the Tehran time zone for changes after the prior cumulative time zone update was created (August 2008).

• Israel Standard Time:

  Adjusts the DST start and end dates for the Jerusalem time zone for changes after the prior cumulative time zone update was created (December 2007).

  Note Updates for the Jerusalem time zone are not included in the Windows Vista package for this update. The Jerusalem time zone updates were available in Windows Vista since Windows Vista was originally released.

• Mauritius Standard Time:

  Adds a new time zone for the Port Louis time zone which introduce DST start dates and ends dates for changes after the prior cumulative time zone update was created (August 2008).

• Morocco Standard Time:

  Adjusts the DST end dates for the Morocco time zone for changes after the prior cumulative time zone update was created (August 2008).

• Pacific SA Standard Time:

  Adjusts the DST end dates for the year 2009 for the Santiago time zone for changes after the prior cumulative time zone update was created (August 2008).

  Note Updates for the Pacific SA Standard Time are not included in the Windows Vista package for this update. The Santiago time zone update was available for Windows Vista in the prior time zone update (August 2008).

• Pakistan Standard Time:

  Adjusts the DST end date for the Islamabad / Karachi time zone for changes after the prior cumulative time zone update was created (August 2008).

• South America:
  E. South America Standard Time
  Central Brazilian Standard Time

  Adjusts the DST start dates and end dates for the Brasilia time zone and for the Manaus time zone for changes after the prior cumulative time zone update was created (August 2008).

Windows XP

Prerequisites

To apply this update, you must have Windows XP Service Pack 2 (SP2) or Windows XP Service Pack 3 (SP3) installed on the computer. For more information, click the following article number to view the article in the Microsoft Knowledge Base:

Restart information

You do not have to restart the computer after you apply this update.

Update replacement information

Note You can install this cumulative update rollup even after you have installed any of the following previously-released updates. This update replaces the following update:

File information

The English version of this update has the file attributes (or later file attributes) that are listed in the following table. The dates and times for these files are listed in Coordinated Universal Time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time item in Control Panel.

Windows XP with SP2, x86-based versions

If you apply this update to Windows XP SP2 and then upgrade to Windows XP SP3, the file version for Tzchange.exe after the upgrade is 5.1.2600.5512. This is the Tzchange.exe version from Windows XP SP3. This behavior is expected and does not affect the DST changes that this update applies. You do not have to reapply this update.

Note

• If you apply this update after you upgrade from Windows XP SP2 to Windows XP SP3, the file version for Tzchange.exe is 5.1.2600.5699.
• If you apply this update to Windows XP SP2 and then upgrade to Windows XP SP3, the file version for Tzchange.exe after the upgrade is 5.1.2600.5512. This is the Tzchange.exe version from Windows XP SP3. This behavior is expected and does not affect the DST changes that this update applies. You do not have to reapply this update.

Windows XP with SP3, x86-based versions

Windows Server 2003

Prerequisites

To apply this update, you must have Windows Server 2003 Service Pack 1 (SP1) or Windows Server 2003 SP2 installed on the computer. For more information, click the following article number to view the article in the Microsoft Knowledge Base:

Restart information

You do not have to restart the computer after you apply this update.

Update replacement information

Note You can install this cumulative update rollup even after you have installed any of the following previously-released updates. This update replaces the following update:

File information

The English version of this update has the file attributes (or later file attributes) that are listed in the following table. The dates and times for these files are listed in Coordinated Universal Time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time item in Control Panel.

Windows Server 2003 with SP1, x86-based versions

Windows Server 2003 with SP2, x86-based versions

Windows Server 2003 with SP1, x64-based versions and Windows XP x64 Edition

Windows Server 2003 with SP2, x64-based versions and Windows XP x64 Edition with SP2

Windows Server 2003 with SP1, Itanium-based versions

Windows Server 2003 with SP2, Itanium-based versions

Windows Vista

Prerequisites

To apply this update, you must have Windows Vista Service Pack 1 (SP1) installed on the computer. For more information, click the following article number to view the article in the Microsoft Knowledge Base:

Restart information

You do not have to restart the computer after you apply this update.

Update replacement information

Note You can install this cumulative update rollup even after you have installed any of the following previously-released updates. This update replaces the following update:

File information

The English version of this update has the file attributes (or later file attributes) that are listed in the following table. The dates and times for these files are listed in Coordinated Universal Time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time item in Control Panel.

Windows Vista and Windows Server 2008 file information notes

Windows Vista and Windows Server 2008 file information note

The MANIFEST files (.manifest) and MUM files (.mum) installed for each environment are listed separately . MUM and MANIFEST files, and the associated security catalog (.cat) files, are critical to maintaining the state of the updated component. The security catalog files (attributes not listed) are signed with a Microsoft digital signature.

For all supported x86-based versions of Windows Server 2008 and Windows Vista

For all supported x64-based versions of Windows Server 2008 and Windows Vista

For all supported Itanium-based versions of Windows Server 2008

Additional file information for Windows Server 2008 and Windows Vista

Additional files for all supported x86-based versions of Windows Server 2008 and Windows Vista

Additional files for all supported x64-based versions of Windows Server 2008 and Windows Vista

Additional files for all supported Itanium-based versions of Windows Server 2008

You are running an application that is based on Subsystem for UNIX-based Applications (SUA) on a Windows Vista-based or a Windows Server 2008-based computer. However, the application becomes unresponsive. Additionally, Task Manager shows that the Psxss.exe process consumes 100 percent of CPU time. This problem typically occurs when you start or stop the application.

This problem occurs because the structure of a process at the head of a process group is reused at the wrong time. This behavior causes an endless loop that the Psxss.exe process cannot exit.

Hotfix information

Important Windows Vista and Windows Server 2008 hotfixes are included in the same packages. However, only one of these products may be listed on the “Hotfix Request” page. To request the hotfix package that applies to both Windows Vista and Windows Server 2008, just select the product that is listed on the page.

A supported hotfix is available from Microsoft. However, this hotfix is intended to correct only the problem that is described in this article. Apply this hotfix only to systems that are experiencing the problem described in this article. This hotfix might receive additional testing. Therefore, if you are not severely affected by this problem, we recommend that you wait for the next software update that contains this hotfix.

If the hotfix is available for download, there is a Hotfix download available section at the top of this Knowledge Base article. If this section does not appear, contact Microsoft Customer Service and Support to obtain the hotfix.

Note If additional issues occur or if any troubleshooting is required, you might have to create a separate service request. The usual support costs will apply to additional support questions and issues that do not qualify for this specific hotfix. For a complete list of Microsoft Customer Service and Support telephone numbers or to create a separate service request, visit the following Microsoft Web site:

Note The Hotfix download available form displays the languages for which the hotfix is available. If you do not see your language, it is because a hotfix is not available for that language.

Prerequisites

To apply this hotfix, you must have Subsystem for UNIX-based Applications installed on the computer.

Restart requirement

You must restart the computer after you apply this hotfix.

Hotfix replacement information

This hotfix does not replace any other hotfixes.

File information

The English version of this hotfix has the file attributes (or later file attributes) that are listed in the following table. The dates and times for these files are listed in Coordinated Universal Time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time item in Control Panel.

Windows Vista and Windows Server 2008 file information notes

• The files that apply to a specific product, milestone (RTM, SPn), and service branch (LDR, GDR) can be identified by examining the file version numbers as shown in the following table.
  Collapse this tableExpand this table

  Version	Product	Milestone	Service branch
  6.0.6000.16xxx	Windows Vista	RTM	GDR
  6.0.6000.20xxx	Windows Vista	RTM	LDR
  6.0.6001.18xxx	Windows Vista SP1 and Windows Server 2008 SP1	SP1	GDR
  6.0.6001.22xxx	Windows Vista SP1 and Windows Server 2008 SP1	SP1	LDR

• Service Pack 1 is integrated into Windows Server 2008. Therefore, RTM milestone files apply only to Windows Vista. RTM milestone files have a 6.0.0000.xxxxxx version number.
• The .manifest files and the .mum files that are installed in each environment are listed separately in the Additional file information for Windows Server 2008 and for Windows Vista section. These files and their associated .cat (security catalog) files are critical to maintaining the state of the updated component. The .cat files are signed with a Microsoft digital signature. The attributes of these security files are not listed.

For all supported x86-based versions of Windows Server 2008 and Windows Vista

For all supported x64-based versions of Windows Server 2008 and Windows Vista

For all supported Itanium-based versions of Windows Server 2008